Download Nextway USB Devices Driver

*Only compatible with Windows Vista/7/8/10 OS (Does not operate on Mac OS)


Download Nextway Usb Devices Driver Updater


If drivers were not downloaded automatically by Windows Update, use Device Manager to refresh the driver from Windows Update, or contact the device manufacturer I’m Moli, your virtual agent. I can help with Moto phone issues. USB Device drivers downloads USB Device Here are USB Device drivers. You can find drivers for USB Device for any brands. Choose a needed brand for driver USB Device download. If you cannot find. Download the latest and original Google Nexus USB Drivers to connect any Google Nexus Smartphone and Tablets to the Windows Computer quickly.

This article includes all of the software downloads. Navigate through the tabs to select the software you need, click on the red 'Click here' link to download the program of your choice.

Device Updater

OS Requirements: Windows Vista/7/8/10

USB 2861 Device and related drivers. IOI SD/M MC Disk USB Device. Input Devices (up to date). Mobile Phones & Portable Devices (up to date).

*Used to download updates for GTX, BDX, X4, Livewire, ITSX

Click hereto download the Device Updater.

Make sure all devices are unplugged during the install process.

Livelink Gen-II

Download Nextway Usb Devices Drivers

OS Requirements: Windows Vista/7/8/10

*Datalogging software.

Click hereto download Livelink Gen-II.

Make sure all devices are unplugged during the install process.

Advantage III

OS Requirements: Windows Vista/7/8/10

Click hereto download Advantage III.

Make sure all devices are unplugged during the install process.


Windows 32bit drivers click here.

Windows 64bit drivers click here.

Install Instructions

Acer eeprom driver download.

If you installed the SCT device updater before you plugged the device in then this should be easy to fix.

With your device connected:

Open your computers Device Manager.

Look for a device that is not installed like one with a yellow exclamation mark. (Here is a screenshot of what you are looking for.)

If you see this, right click it and select update driver.

A new window should open up and give you the option to either automatically search, or browse for files.

Click browse for files

Navigate to the folder you downloaded, and select “Open”.

If you did this correctly, it’ll tell you your drivers have successfully been updated and once you click “OK” you should see something similar to the picture below.

Now your communication should work between the device and the computer. With most devices, you will want to unplug it and plug it back in and restart the device updater. Then click “Display Device Settings and Serial” and if the serial number shows up, it is communicating.

Update Agent for GT's

How do I update my Bully Dog GT Tuner?

Basic Steps to Update a GT Tuner

1. Run the Update Agent.

2. Connect the Micro SD card to your computer.

3. Choose the vehicle application and let the Agent search.

4. Click the Update button.

5. When the Update is finished, put the Micro SD card in the GT.

6. Update the GT Platinum from the SD card by choosing Update GT Software, or Update GT Firmware on the Main Menu. (option will be all the way at the bottom of the main menu.)

Detailed Steps to Update a GT Tuner

Where do I Find the Bully Dog Light Duty Update Agent for a Bully Dog Gauge GT Tuner?

To install the Bully Dog Light Duty Update Agent please open the following link. Then open and run the file.

  1. Open the update agent. Note: the tune will need to be uninstalled from your vehicle to update. You can check the vehicle is stock by going to show settings, the status will read “installed” or “not installed”
  2. Connect the SD with either the card reader or the GT itself and the USB cable
  3. Highlight the card in the update agent, and select “select device”

4. Select your device (40417, 40420, etc.) then select “download and upgrade”

5. Wait for the download to finish, you will see this message.

6. Select ok, then with the sd card in the device, go to change vehicle at the top of the menu, if it is the first time updating, and select your vehicle. Or go to update software at the bottom of the main menu to update with the latest files.

Download Nextway USB Devices Driver

Most USB devices drivers automatically installed after you plug in on you PC. Most of use call it 'Plug and Play'. For example if you plug a USB mouse into your USB port windows automatically searching and install the appropriate driver. You will see a dialog box like this:
But not all USB devices recognize by windows, you need to install the driver first before using it.
1. First identify what is your device model number/type name. For example you are using Verizon broadband modem UM150.
2. Go to the official download page and download the correct driver that match your USB device model.
3. Install it and allow few minutes for windows to fully updates and identify all components for the USB.
Certain USB devices come with firmware CD and you just need to install it on your system.
Windows already have the generic drivers for USB FLASH DRIVE and MEMORY CARD. Normally it is called 'Mass Storage Device', by default all windows operating system have this driver in thier system, if not you can get it from Microsoft site here:
This apply for most external device such as:
external magnetic hard drives
external optical drives, including CD and DVD reader and writer drives
portable flash memory devices
solid-state drives
adapters bridging between standard flash memory cards and USB connections
digital cameras
digital audio players and portable media players
card readers
mobile phones
For memory card if you get an error 'Disk Management Console View is not Up to Date'. I already write a post to solve the problems in details here.
1. Try to plug the USB device into other USB port.
2. If the problem persist, open device manager and expand the USB Root Hub
3. You will see unknown device or any device marked with yellow.
4. Right click on it and select Uninstall. Reboot your computer.
5. Open device manager again and right click on of the any USB root hub list and select scan for hardware change.
1. Turn off your computer.
2. Deatch power chord or power supply.
3. Remove battery (for laptop)
4. Open your computer and plug the USB device.
Sometimes when the USB is too hot and too busy windows will stop the USB device to prevent from system instability. I already experience this with few device from HUAWEI which require me to unplug and replug every time it is not responsive. Later on i solved the problem buy put a small fan near the USB device to keep the temperature low.
All driver for windows 7, 8, 8.1, 10, XP, windowns Server 32bit - 64bit. how to install drivers on windows 7 for laptops. All download Free driver for laptops