Drivers Smsc SCSI & RAID Devices

SCSI (SCSI device support) and then BLKDEVSD (SCSI disk support) in 'Device Drivers - SCSI Support'. (SMSC LAN95XX based USB 2.0 10/100 ethernet devices). Adaptec SCSI RAID 2110S This 64-bit/66MHz PCI-to-SCSI RAID card is intended for entry-level SCSI servers and workstations. Allows for the connection of up to 15 SCSI devices running at up to 160 MByte/sec. Supports RAID levels 0, 1, 0/1, 5, 0/5, and JBOD. 32 MB cache memory is onboard. 3) You have one or more internal SCSI devices and one or more external SCSI devices, all attached to the same internal SCSI adapter. The last external device on the daisy chain must be terminated and the last internal device on a 50 pin ribbon cable must be terminated or attached to.

  1. Drivers Smsc Scsi & Raid Devices Download
  2. Drivers Smsc Scsi & Raid Devices Usb

Revision 0.12


Copyright 1996 Erik Stahlman

Released under terms of the GNU General Public License.

Drivers Smsc Scsi & Raid Devices Download

This file contains the instructions and caveats for my SMC9xxx driver. Youshould not be using the driver without reading this file.

Things to note about installation:

  1. The driver should work on all kernels from 1.2.13 until 1.3.71.(A kernel patch is supplied for 1.3.71 )

  2. If you include this into the kernel, you might need to change someoptions, such as for forcing IRQ.

  3. To compile as a module, run ‘make’.Make will give you the appropriate options for various kernel support.

  4. Ftdi Mobile Phones & Portable Devices Driver download. Loading the driver as a module:

Drivers Smsc Scsi & Raid Devices Usb

How to obtain the latest version?

Contacting me: