Drivers Tecnoalarm Port Devices

1.B.1 CONNECTION OF THE CONTROL PANEL VIA USB PORT Program the control panel as usual through the internal USB port (TP8-96 VIDEO and TP16-512 GSM) or through the PROG USB interface (TP8-64 BUS and TP16-256) and using the Tecnoalarm software from the version 4.0 onwards (see chapter 4). 1.B.2 DATE AND TIME CHECK. For most devices, the Ports device setup class and the Serial function driver provide the functionality required to operate serial ports and COM ports. To install serial ports and COM ports using these system-supplied components, do the following.

Download the latest drivers, software, firmware, and diagnostics for your HP products from the official HP Support website.

-->

This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.

Drivers genius. Original product version: Windows 10, version 1703
Original KB number: 4021854

Symptom

When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.

Cause

This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.

This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.

Drivers Tecnoalarm Port Devices Terminal

Resolution

Drivers

To fix this issue, use one of the following methods.

Method 1

To resolve this issue, install update 4022716.

Method 2

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.

Method 3

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.

Note

See the device manufacturer's user guide for specific instructions about how to install the driver.

Method 4

Drivers Tecnoalarm Port Devices Replicator

Devices

If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:

  1. Install the device-specific driver (see Method 2).
  2. Open Device Manager.
  3. Right-click (or tap and hold) the name of the device, and then select Uninstall.
  4. Restart the computer.

When it restarts, Windows will try to reinstall the device by using the device-specific driver.