Sigma Micro Sound Cards & Media Devices Driver

This collection of software programs is included on the DVD of Sound Card Software Collection.

Sigma Micro Sound Cards & Media Devices Driver

Sigma Micro Sound Cards & Media Devices Driver

This pushes the next available card to index 0 and since there only is one other sound card, it is set as default. You must reboot, after changing modprobe options or reload the modules correctly, ergo with no alsa sound active. Simply using only the second line is discouraged, since with multiple sound card the other card might get the index 0. Download widcomm bluetooth devices driver. Your options for adding a sound card to an IBM PS/2 with the MCA bus are limited, but the IBM M-Audio Capture & Playback Adapter (M-ACPA) is somewhat easier. RE: Sigma Tel sound card 2005/07/17 22:41:00 jwr,if you are using a pod xt, go to Line 6.com and download the driver software for usb, I have mc pro and the same dell with the sigma tel, you can use pod as your soundcard to play/record, and when you unplug your pod it will default back to sigma tel, set your mc pro to use pod xt as the sound. I have a Sigma Tel C-Major Audio sound card. In my Sounds and Audio Devices Properties, Hardware I have the following listed. Sigma Tel C- Major Audio PCI bus 0, device 30, function 2 Device status: working properly Driver Version: 5:10.0.4255 and this device (enabled) Audio Codecs - Standard System Device - Location unknown. Legacy Audio Drivers.

Audio & DSP CW Digital Modes Rig Control, Logging & Voice Keying

TitleDescription
BR-universal-Filt Real time DSP filter particularly for applications of amateur radios
IIR, FIR filter, low-pass, high-pass, band-pass filter, band suppressor (notch filter) individually adjustable
noise filter, irregular signal filter, hum filter, peak filter
frequency tuning and inverting
mixer support
support of several soundcards (also virtual soundcards) e.g VAC Virtual Audio Cable
small file size
simple to use
multiple language support
MM-DSP FilterBy JE3HHT - Makoto Mori
DSP filter with Windows and Soundcard
Win95/98/ME/NT/2000/XP/Vista & Win7 (Seems to run on Windows 10, but vendor has not tested.)
RoMac 10 Band Equalizer 2012The RoMac 10 Band Equalizer 2012 coupled with your present computer's soundcard, affords you the finest Windows based digital equalizer made for the Amateur Radio community. Using professional techniques such as audio equalization will enhance the audio quality of your signal. The RoMac 10 Band Equalizer 2012 is like having a full featured audio studio in one package.
Spectran V2Spectran is a program to do real time or deferred spectral analysis / waterfall display, in addition to real time audio filtering (band pass, denoising, band reject and CW peaking) of audio signals, using the PC sound card to digitize the input analog signal, or taking as input a WAV file. Its characteristics are well suited to dig weak signals buried into noise, thanks to a selectable bin size down to 21 millihertz. On the opposite site, it can visualize normal CW signals, resolving individual dots and dashes (with a reasonably fast PC).
Audio Spectrum Analyzer ('Spectrum Lab')This program started as a simple FFT program running under DOS a long time ago, but it is now a specialized audio analyzer, filter, frequency converter, hum filter, data logger etc
Voice ShaperVoice Shaper is a speech pre-processor for SSB transceivers. It receives the voice signal from the microphone connected to the soundcard, and sends the processed audio back to the soundcard in real time. The following processing functions are implemented in the program: Bandpass filter; 7-band equalizer;
Noise gate;
Compressor;
RF envelope clipper.
The configuration procedure of the DSP functions is interactive: the program records your voice, then it plays the recording back through the processor and allows you to adjust the settings and immediately hear the effect of your changes. Real-time spectrum and histogram displays provide the insight into the processor operation and make the configuration process even easier.

Sigma Micro Sound Cards & Media Devices Drivers


TitleDescription
CW SkimmerMulti-channel CW decoder and analyzer for Windows
CwGetA program to decode morse code (CW) via sound card to text. It can work as narrow-band sound DSP-filter also. No additional hardware required - you need only receiver and computer with a sound card. Can integrate with AALog logger. It is a software morse decoder that really work!
CwTypeThe terminal program for CW-operators. You can transmit both from the keyboard and from a paddle connected to game or LPT ports. You can also operate in paddle iambic mode. Control of the transceiver (PTT and CW keying) is made through one of the COM or LPT ports. CwType can integrate with AALog software.
G4FON Koch Morse TrainerWhen I returned to Amateur Radio my CW was decidedly rusty. What I felt I needed was a CW Trainer to get my speed back. I looked around the Web and found an article by Dave Finley N1IRZ on a method of CW training developed by a German psychologist called Ludwig Koch back in the 1930's.
Reading though Dave's article, I decided that it all made a lot of sense. Basically you start off learning the code at the speed you would like to achieve. Unlike the Farnsworth method which seeks to reduce the gap between the letters as you become more efficient, Koch came up with the idea that you should start off just learning two letters at full speed and add an additional letter once you reach 90% proficiency until you have mastered them all. Since you are only learning one new letter or figure at a time, your frustration is significantly reduced.
Dave Finley gave a suggested order for learning the letters and figures and recommended a programme called Super Morse to use as a trainer. I quickly realised that Super Morse offered more features than were required to learn Morse by the Koch method and decided to write my own programme orientated towards the Koch method.
Morse RunnerContest simulator for Windows
MRP40MRP40 is a powerful and highly-effective ham radio software program that decodes received CW audio that has been fed to a computer's sound card. The decoded text is displayed on the computer's monitor. For transmitting CW, the program encodes keystrokes from the computer's keyboard. Hams use MRP40 to send and read QRQ (high-speed) CW, to help read weak DX signals, and to improve CW contest scores.. With MRP40 you are number one on the air! ..
RoMac CW IDRoMac Software's Automatic CW identifier and Tuning Pulser utilizes your present computer's sound card to automatically send your callsign at preset intervals, to insure your stations compliance with FCC regulations. Also incorporated is a Tuning Pulser aka Pecker, to aid in reducing stress and heat while tuning your amplifier, antenna tuner, etc.

TitleDescription
PC ALEPCALE software is an ALE software controller for PC computers.
ChromaPIXThe ChromaPIX concept is to develop a high-performance SSTV workstation system, that exploits the newest DSP, imaging, and operating-system technologies.
Although the program is not 'feature-crippled' or date-limited, unregistered copies are time-limited to 30 minutes of operation per session.
MMSSTVMMSSTV By JE3HHT - Makoto Mori
Slow Scan TV with Windows and Soundcard. For WinXP - Vista - Win7 (Seems to run on Windows 10, but vendor has not tested.)
SSTV ToolsThis program generates SSTV audio signals from a bitmap and saves them in a WAV or MMV file. Multiple SSTV formats and sampling rates are supported. The software can generate either a clean signal suitable for transmission, or a signal contaminated with noise, suffering from QSB, etc. - much like in Morse Runner, but with all effects carefully calibrated and measured in dB, Hz, and ms.
What it is good for
Create pre-canned SSTV messages, such as 'CQ' or '73 DE', and transmit them without any SSTV software, just by playing the audio back in a media player.
Test your SSTV receiving software and see how tolerant it is to the noise, soundcard calibraion errors, receiver frequency offset, etc. Compare different receiving programs quantitatively.
How to use it
Specify the bitmap and output file name, set other parameters, and click on the Generate button.
Use only the 320x256, 24-bit BMP files.
Tick the Distort The Signal check box to enable the distortion controls.
If you enable QSB, add some noise as well. The signal is supposed to go below the noise during the QSB nulls.
To model selective fading, use the Multipath option, set a short delay of 1-2 ms and an amplitude ratio of 0 dB.
To model echo, use the Multipath option as well, but set a longer delay and a lower amplitude.
DIGTRXDigital SSTV software for sound card.
EasyPalI don't intend to waffle on about Easypal..
what I do want to say is that it is currently the 'Bee's Knees' of Digital SSTV (Slow Scan TeleVision)
programs for the PC !
Easypal is being updated all the time..
it is currently still in BETA Stage but well worth trying it out.
More features are being added..
Efficiency Improved. and users taking up this facet of the Hobby are increasing daily.
You will need an interface to connect your PC Soundcard and Transceiver.
KG-STVExperimental program to transfer digital images and texts by JJ0OBZ.
QSSTVQSSTV 9 is a program for receiving and transmitting SSTV and HAMDRM (sometimes called DSSTV). It is compatible with most of MMSSTV and EasyPal.
FDMDV - Frequency Division Multiplex Digital Voice FDMDV is the latest digital voice mode on HF - it caters to high quality digital voice under poor band conditions, in only 1100Hz bandwidth!.
FreeDV: Digital Voice for HFFreeDV is a GUI application for Windows, Linux and MacOS (BSD and Android in development) that allows any SSB radio to be used for low bit rate digital voice.
Speech is compressed down to 700-1600 bit/s then modulated onto a 1.25 kHz wide signal comprised of 16 QPSK carriers which is sent to the Mic input of a SSB radio. The signal is received by an SSB radio, then demodulated and decoded by FreeDV. FreeDV 700(B) rivals SSB in it's low SNR performance. At high SNRs FreeDV 1600 sounds like FM, with no annoying analog HF radio noise.
FreeDV was built by an international team of Radio Amateurs working together on coding, design, user interface and testing. FreeDV is open source software, released under the GNU Public License version 2.1. The FDMDV modem and Codec 2 Speech codec used in FreeDV are also open source.
WinDRM - HF Digital Radio MondialeWinDRM is the hottest digital mode on HF today! Nothing else exists where you can transfer data at almost 1KB/s without using proprietary hardware!
IZ8BLY HellschreiberFor many years Hell-writing (which is a type of simple facsimile developed in 1927) has been considered to be no more than an oddity by the Amateur community, in fact most hams have never heard of Hellschreiber. It was however a simple mode, that offered very good performance in noisy conditions without requiring much power, if only you could find the equipment!
Now however, with Digital Signal Processing techniques and very good Windows software, the Amateur Radio fraternity is offered the opportunity to experience an advanced digital mode that requires no apologies for its performance.
Hellschreiber can outperform other modes for DX, and requires nothing more than a CW or SSB rig and a PC with a sound card. If you operate PSK31, you can also operate Hell, and what is more, make contacts that are not always possible with PSK31 due to poor conditions.
Operation is simple, slick, easy to tune, and ideal for QSOs and nets. Because of the unique nature of Hellschreiber, you actually see an actual replica of the transmitted signal, so the font used, bold or italic, is faithfully reproduced. Noise adds fuzziness to the received text, but cannot cause incorrect characters to print.
G3PPT's SlowFeldSlowfeld - An Experimental Slow Speed Hellschreiber Program by G3PPT
HF PagerA program intended for short text messages exchanging over HF radio using IFSK modulation (Incremental Frequency Shift Keying). No additional hardware is required. You only need a transceiver and computer with a sound card. A simple circuit for PTT-control can be used.
WSJT-XWSJT-X implements communication protocols or 'modes' called FT8, JT4, JT9, JT65, QRA64, ISCAT, MSK144, and WSPR, as well as one called Echo for detecting and measuring your own radio signals reflected from the Moon. These modes were all designed for making reliable, confirmed QSOs under extreme weak-signal conditions.
WSJT-XWSJT-X implements communication protocols or 'modes' called FT8, JT4, JT9, JT65, QRA64, ISCAT, MSK144, and WSPR, as well as one called Echo for detecting and measuring your own radio signals reflected from the Moon. These modes were all designed for making reliable, confirmed QSOs under extreme weak-signal conditions.
MF TeleTypeMF TeleType is a Soundcard based audio data Modem which does encode / decode TeleType signals based on the well known and very reliable DTMF (dual-tone, multi-frequency) system.
ZL2AFP CMSKMSK (Minimum Shift Keying) is very similar to PSK, but instead of changing the phase to signal the data bits, the frequency is advanced or retarded a very small amount (exactly half the symbol rate), sufficient to exactly achieve a 180 degree phase shift in one bit period. Because the resulting phase change is produced smoothly, without any sudden changes in phase, the signal does not require raised cosine (amplitude) modulation or other means of spectrum management. For PSK modes, such modulation must be employed to drop the output to zero at the phase change, in order to reduce the keying sidebands. The MSK spectrum is very similar to PSK, but the phase relationship between the carrier and the data is different. MSK is little used on HF, but has been widely used on LF, notably (at 100 baud and 200 baud) for DGPS beacons, and (at 50 baud and 100 baud) for VLF submarine communications.
The HUGE advantage of MSK over PSK is that because there is no amplitude information on the signal, the transmitting amplifier need not be linear. The transmitter duty cycle is always 100%, not reduced by the AM modulation, so the average signal strength is greater. In other respects the mode is similar to PSK, and in fact the same receiver demodulator can be used, although a different means of recovering symbol sync is required.
DominoEXFECThis is a computer program for Amateur Radio transmission and reception using a computer and HF radio transceiver. The program provides computer chat-mode operation on the HF bands, using a sound card technique to generate and modulate for transmission using tones at audio frequency, and receive and decode the incoming signals, also at audio frequency. An SSB transceiver translates these signals to and from the HF Amateur Bands. The DominoEX mode is a development from earlier experimental DominoF and DominoG programs, but is not compatible with them. This version (DominoEXFEC V2.0) is compatible with earlier ZL2AFP DominoEX versions, and also with MULTIPSK, with and without FEC.
DominoEX operates using a variation of the MFSK technique (MFSK = Multiple Frequency Shift Keying), since MFSK offers very good immunity to interference and ionospheric effects, and is also very sensitive. However, MFSK can be quite difficult to tune in, and suffers from some interference effects, which are usually masked by using error correction. This unique program addresses these limitations in a special way that wipes away all problems. DominoEX is easy to use, and hence ideal for beginners. You will be impressed with the performance!
FSQcall
FSQ is a Fast Simple QSO mode designed specifically for HF. It works well under NVIS and sunrise/sunset conditions on the lower bands, and also works well for short skip and grey-line on higher bands. It can also be used on VHF FM, and clearly has a much wider useful range of operating conditions that other more conventional digital modes. FSQ transmission is also well within the capability of micro-controller based devices for low-power propagation transmissions (MEPT and telemetry). The FSQ modulation, coding and FSQCall protocol are publicly disclosed and described, and the software is open source.
FSQ was developed by Con Wassilieff ZL2AFP with the assistance of Murray Greenman ZL1BPU. The first QSO took place between these two on 28th November 2014, and the first Alpha executable release was on 17th December 2014. The source code was released with the Beta version 0.23 on 3rd March 2015. The first US version release (V0.24 RC1 by Bob NW8L) was on 29th March 2015. The first full-package public release was by Bob NW8L on 29 April 2015. A version of fldigi with full FSQ support was released by Dave W1HKJ on 16 July 2015, and includes support for Linux and Mac platforms.
FSQ is intended for fixed frequency (channelized) operation, with dedicated calling frequencies. It isn't intended as a 'tune around to see what you can find' mode!
Chip64Chip64 is the software that implements CHIP64 and CHIP128 spread spectrum modes.
IZ8BLY StreamStream is a software that implements MFSK16 and MFSK8 modes designed by me and Murray Greenman ZL1BPU. It also offers a series of experimental modes based on FEC, interleaving and several modulation techniques (PSK, QPSK, MSK).
JasonJason is a weaksignal communication program, especially tailored for LF work.
SIM31
This new hf digital mode (digimode) has the same BPSK modulation of
PSK31 but with a different coded FEC bitstream giving some enhancement
against ionospheric fading and interchannel interferences.
WOLFWOLF (Weak-signal Operation on Low Frequency) is a proposed new signal format and protocol designed specifically for the LF bands. It can be used for beacons and for two way communication. Unlike existing formats, which are optimized for a particular S/N (and corresponding speed), WOLF can operate over a wide range of signal levels. For example, a WOLF beacon transmits a 15-character message repeatedly. If the received signal would be adequate for conventional CW, copy will be displayed in 24 seconds. At a level barely enough for 0.4 WPM QRSS, copy will appear within two minutes. Even if the signal is another 10 dB weaker, the message can still be received. It will take from 20 minutes to several hours, depending on the stability of the Tx and Rx. Of course, it is also necessary that the propagation path remain open over the required interval.
MS-DMTMIL-STD Data Modem Terminal.
IZ8BLY MT63MT63 is a digital radio modulation mode for transmission in high-noise situations developed by Pawel Jalocha SP9VRC. MT63 is designed for keyboard-to-keyboard conversation modes, on HF HAM bands.
Airlink ExpressAirlink Express Box Airlink Express is a user friendly digital mode software package for the Amateur Radio Operator. The software is compatible with Microsoft Windows XP, Microsoft Windows Vista, and Microsoft Windows 7. (Seems to run on Windows 10, but vendor has not tested.) It offers PSK, MFSK and RTTY digital modes with logging and macro capabilities. If you have ever used the Digipan software you will be immediately familiar with Airlink Express.
With the release of Windows Vista and Windows 7, Microsoft introduced a new sound architecture. Airlink Express is developed to support this new sound architecture, yet it maintains complete backward compatibility with Windows XP. Airlink Express brings back the familiar volume slider interface you've become used to from older Windows versions.
FLdigiFLdigi is a complete digital multi-mode program with many advanced features including rig control. Works on Windows XP through Windows 10.
HamscopeHamScope is a multi-mode communications interface for amateur radio that supports:
PSK31 (BPSK and QPSK, see PSK31 Home Page )
RTTY (HamScope uses Makoto Mori's MMTTY Engine)
ASCII (both 7 bit and 8 bit protocols using MMTTY)
MFSK16 (see MFSK16 Home Page )
PACKET (HamScope uses George Rossopoulos' AGWPE Engine)
CW
MixW v3.2MixW is a multi mode multi functional software for every day logging and contests. It has many useful features that make your QSO logging process almost a 100% automatic procedure.
.
MVARI By JE3HHT - Makoto MoriMMVARI is a multi-Mode SoundCard Ham (Amateur) Radio program for receiving and transmitting the RTTY-PSK-FSK-MFSK modes. The program was written to experiment with the efficiency of transmitting Japanese and East Asian languages (HL/BV/BY) using the VARICODE. Eastern Asia languages, such as Japanese, Hangul, and Chinese, have many characters.
MultiPSKThe Swiss-Army-Knife of multi-mode software!
Phase Shift Keying modes:
BPSK: BPSK31-63-125-250 / CHIP (64/128) / PSK10 / PSKFEC31 / PSKAM10-31-50
BPSK with SSTV: PSK63 F - PSK220F + DIGISSTV 'Run'
QPSK: QPSK31-63-125-250
8PSK: VDL2
MPSK: MT63
PACKET BPSK1200-250-63-31 + APRS+ DIGISSTV 'Run'
MIL-STD-188-110A - 4285
HFDL
EPIRB-ELT-PLB beacons
ARGOS (beacons/satellites)
AUTEX
On-Off Keying Modes: CW / CCW-OOK / CCW-FSK / QRSS
Amplitude modulation mode: APT faxes (NOAA satellites)
Frequency Shift Keying modes:
PACKET: 110-300-1200 bauds + APRS+ DIGISSTV 'Run'
PACTOR 1 / AMTOR FEC-Navtex / AMTOR ARQ / SITOR A
ASCII / RTTY 45-50-75-100-110-150-200 / SYNOP + SHIP / IEC 870-5
1382 / BIIS / GMDSS DSC / ACARS (VHF) / DGPS / NWR SAME / ARQ-E / ARQ-E3
Multi Frequency Shift Keying modes:
MFSK8 / MFSK16/32/64 (+SSTV)
OLIVIA / Contestia / RTTYM / VOICE
THROB/THROBX
DominoF / DominoEX / THOR
PAX / PAX2
Automatic Link Establishment (see http://www.hflink.com) MIL-STD-188-141A+
ARQ FAE / ALE400 + ARQ FAE
DTMF, SELCAL
JT65 (A B and C)
LENTUS
COQUELET
Base band modes: POCSAG, AIS, Packet 9600 bauds (G3RUH)
Hellschreiber modes: FELD HELL / FM HELL(105-245) / PSK HELL / HELL 80
Graphic modes: HF FAX / SSTV / PSK SSTV modes (mentioned above) / MFSK16 SSTV (mentioned above)
PPM (by positioned pulses) modes: mode S (ADS-B included)
DSP modes: Filters / Analysis / Binaural CW reception
RTTY, CW, BPSK31, BPSK63 and PSKFEC31 Panoramics
Identifiers: Video ID / RS ID / Call ID
TCP/IP digital modem
Integered SdR demodulator/modulator
Includes 'Clock' a program to synchronize your PC to the atomic time stations.
PocketDigiPocketDigi is an open source utility developed by OK1IAK to provide ham radio operators with PocketPC PDAs (and Windows computers) with the ability to use (encode and decode) digital modes such as RTTY (teletype), PSK (phase shift keying), and CW (Morse Code).
TrueTTYA program for amateur radio digital communications via a sound card. Supported modes are RTTY (Baudot code), ASCII (7 or 8 bits), PSK31 (BPSK and QPSK), BPSK63, QPSK63, BPSK125, AMTOR-FEC (SITOR-B, NAVTEX), MultiFSK-16, MultiFSK-8. HF-PACKET and UHF-PACKET (AX25) are supported in KISS-TNC emulation mode. SELFEC SITOR, AMTOR-ARQ (SITOR-A) and DTMF-code decoding is also possible. No additional hardware is required. You only need a transceiver and computer (Pentium-100 or better) with a sound card. A simple circuit for PTT-control can be used. It is fast and convenient to use with many macros for transmitting. Can integrate with AALog logger.
AGW Packet EngineThis program does all the traffic between the packet applications (AGWFWD, AGWTERMINAL, AGWCLUSTER and others) and your TNCs. It runs as an Icon. It has the capability to handle 100 tncs and 100 applications at the same time. For the moment works with external tncs in KISS mode, Baycom Like serial modems for 1200-9600, DRSI cards (4 sharing the same IRQ line 8 Radioports), Baycom USCC cards, Sound Cards with the PSA chipset 1200/9600, OE5DXL,YAM, OptoScc, PetScc . New drivers for new hardware will be available as soon as I get the Hardware!!! It handles also the special dual port tncs of Kantronics (KAM,KPC96 etc.) and AEA (PK900 etc). This program has the capabilities to handle different applications it does that only if each application has a different call. Eg agwfwd.exe with SV2AGW-1,Agwterminal.exe SV2AGW, agwcluster.exe SV2AGW-3 etc. That way with just a tnc you work like you have two or three or four different tnc and TRCVRs. In case you have more than a tnc then each program can work all the tncs at the same time. You can eg. Chat with a friend with the agwterminal.exe in tnc1 (e.g. vhf 1200bauds) and also receive a YAPP form tnc2 (eg. UHF 9600bauds). And also receive your mail from tnc1 and cluster dxspots also from tnc1. The combinations are unlimited. What the program doesn't do is that of gateway for other stations. Other stations cannot gateway from your tncs. Also it doesn't serves as a digi . This is done for two reasons. First I don't like the idea 'every tnc and a digi'. Leave it for clubs and special packet teams to decide if we need a digi or not. Second because I have to write a lot of code and I can't do it right now. Maybe in the future if I receive many requests for those operations. AGW Packet Engine can also use the native build in TCPIP protocol over Packet Radio.
AGW TerminalThis program needs no other explanations because it is just a terminal program. The only difference is that it is multitasking. This means that you can have multiple connects and you can YAPP without restrictions. You can receive as many YAPPs as you wish simultaneously. If you have more than a RadioPort (You have more than a TNC) you can connect in any RadioPort. You can have also unlimited number of connections (about 100). Script Files. You can run at any time a script file with packet commands. Remote Control. Any station that connects you can remote the program if it has the remote Privilege. It can dir and receive a file from your disks etc. The AGWterminal has not a Help file. This isn't so big problem. You ask me about the remote control. Just enter from the properties menu and the remote dialog the callsigns. Each time someone wishes to remote receive files from you will type the 'REMOTE' command. If its call is in the list he will get remote access otherwise not. Everyone can send you a Yapp file. The program will receive the file. You don't have to do anything to receive a Yapp file. Just watch. You can also specify a file to send when someone connects you. Fill the proper dialog from the properties page. In this file write the follow ,if you wish. 'Type REMOTE for remote control'. Then add anything else you wish. The file must be a valid text file (no word-processing file). The program is much faster in sending from other dos applications. You will see it if you work 9600b packet station. You have the ability to use the program also as a telnet client for TCPIP connections.
AGWTrackerModern APRS terminal. Advanced tracking/messaging facilities with online map displays.
AGW UI Digi (APRS)AGWUIDigi is a program that help you setup your packet station to act as an APRS Digipeater. Its unique feature is that it is written to take advantage of the Windows XP facilities. Among others can act as Cross Port APRS digi if you have more than a RadioPort. Now Can be used also as Internet Gateway to feed data to and from Internet. The program is the Perfect Companion to AGWTracker.
APRSISCE/32 for Win32APRSISCE/32 is an advanced Automatic Packet Reporting System (APRS) Client for Amateur Radio, written for Windows and Windows Mobile (CE). It will also run on Linux and Mac OS under WINE, as well as other virtual machines.
APRSISCE/32 can be configured to run connected directly to the APRS-IS via an internet connection, as well as connected to the APRS-RF network via AGWPE, a TNC, or one of the APRS capable Radios including the Kenwood TH-D72/TM-D710 and Yaesu FTM-350.
BPQ32 for WindowsBPQ for DOS and BPQ32 for Windows were written by John Wiseman G8BPQ/GM8BPQ and have a considerable following of appreciative users.
BPQ32 includes BPQMailChat, a modern BBS and Chat system.
BPQ32 offers three program interfaces. The DLL interface is the fundamental and most capable interface and is recommended for new applications. An AGW-like front end interface is offered permitting BPQ32 to be used with any program currently supporting AGWPE. The third, now deprecated, interface method is ActiveX.
An AGW back end interface has been added to allow BPQ32 to use sound card modems.
Many useful BPQ32 utilities and configuration examples are included.
DigiplexDigiplex is a multi-purpose routing engine aimed to work with the AGW Packet Engine by SV2AGW.
Some of it's features are:
A cross-band AX.25 L2 Smart Digipeater (SMART).
A NETROM router (ROUTE).
An APRS enabled digipeater (APRS).
A high performance router with hop-to-hop ack (DIGIPLEX).
It's intended to interoperate with other network infrastructure components such as NETROM nodes and digipeaters present on your LAN but based on other platforms.
Also it features other functions such as Telnet remote access, a build-in Web server, the capability to define 'managed applications' to be accessed thru it and more..
The program is in the process to be developed with upgrades being continually released as part of the beta process.
DirewolfDire Wolf is a software 'soundcard' modem/TNC and APRS * encoder/decoder. It can be used stand-alone to observe APRS traffic, as a digipeater, APRStt gateway, or Internet Gateway (IGate). It can also be used as a virtual TNC for other applications such as APRSIS32, UI-View32, Xastir, APRS-TW, YAAC, UISS, Linux AX25, SARTrack, RMS Express, and many others.
Outpost PMOutpost is a Windows-based packet message client that lets you send and receive packet messages with almost any Amateur Radio Bulletin Board System (BBS) or TNC Personal Mail Box.
Outpost was designed for the ARES/RACES packet user community. The thinking behind it was to create an intuitive, easy-to-use program that lets ARES/RACES organizations focus on the 'message,' not the 'medium,' as they pass digital message traffic to and from an Operational Area BBS. So, what are the overall design goals?
* Hide the complexity of the native packet environment and shorten the learning curve
* Provide an MS Windows-based packet messaging client
* Automate the packet message handling environment
* Create a program that behaves like your email client that you have at work or home..
* ..create, send, receive, read, delete, reply to, or forward messages
* Support the response efforts and requirements of our local municipalities and served agencies
Outpost has a similar look and feel to other contemporary mail clients. It features Windows-driven forms and screens that handle creating, sending, receiving, storing, and printing packet messages from your PC. It also can run automatically where it periodically checks for out-going and in-coming messages.
Outpost does not yet support any packet message forwarding protocol or SMTP. Instead, it interprets the information sent from the TNC and BBS, then generates the TNC and BBS commands needed to send, list, and retrieve messages from the BBS. It essentially automates the keyboard entry and interpretation performed by the user.
Outpost uses BBSs and PBBSs as mail drops where a user can leave a packet message for someone without the other person needing to be on line at that point in time. Support for many BBS and PBBSs has been built into Outpost with new ones being added as they are identified.
PaxonPaxon is a modern, free packet radio terminal program that is easy to use yet extremely powerful & intuitive. The software runs on any Windows version from Windows 98 to Windows 7 (Seems to run on Windows 10, but vendor has not tested.)
UI-View32 APRS ClientUI-View is an APRS client that runs on Windows. This application differs from most APRS software in that it isn't designed just to be used with TNCs in terminal mode. UI-View also supports TNCs in KISS mode, AGWPE host mode and BPQ host mode. The 32 bit version of UI-View also supports WA8DED/TF host mode, and the variant of it used in the SCS PTC-II and PTC-IIe. The host mode support means that UI-View can be used with a wide range of packet hardware and allows up to 16 RF ports to be used.
It can run as a full-featured internal intelligent digipeater with the TNC in KISS mode, and with modification to the UI-View2.INI file, supports the new WIDEn-N settings, and has full support for connecting to APRS servers on the Internet and running as an IGate or Internet Gateway.
UISSThis program has been designed for packet communication with ISS
(International Space Station), PCSat, ANDE or 'compatible' satellites with ease..
Ideal for any UI packet communication (unproto).
You can digi or connect the satellites with UI-frames complete with TX-data (text),
APRS location and/or APRS messages, bulletins, news, mail, APRS-IS satgate etc..
Although designed for HAM operators communicating with satellites,
can UISS also be used for normal radioamateur basic packet operations or APRS too.
Powerful features allows you easy monitoring of any type of AX25 packet traffic.
Plots the heard stations on a map using UISS module: UI-MapView!
Works in all Windows versions or Linux (using emul software).
UZ7HO Sound Modem - A Software TNCA software TNC that uses a soundcard as a modem and supports AX.25 protocol at 300 and 1200 baud with dual port operation. The software TNC uses the AGW Packet Engine API and emulates the AGW Packet Engine TCP interface in operation.
WinTNCWindows TNC Emulator. Supports AGWPE.
WinPackPopular ham radio packet windows application. By G4IDE (SK)
DigiPanDigiPan stands for 'Digital Panoramic Tuning' and brings the ease and simplicity of PANORAMIC reception and transmission to PSK31and PSK63 operation. DigiPan provides a panoramic display of the frequency spectrum in the form of an active dial scale extending the full width of the computer screen. Depending upon the transceiver IF bandwidth, it is possible to 'see' as many as 40 to 50 PSK31 stations at one time.
WinPSKPSK31 terminal with improved accessibility features.
acarsd - Free ACARS decoder for Linux & Windowsacarsd is an ACARS decoder for a LINUX or Windows PC which attempts to decode ACARS transmissions in real-time using up to four Soundcards. acarsd is also a realtime ACARS Server / ACARS webserver, for the worldwide spotter and ACARS community, if you wish.
PC HFDLARINC 635-3 HF data link decoder.
SigmiraSigmira is a Software Defined Radio (SDR) application program that runs on Windows and Linux. It operates with with an external conventional receiver, RFSpace SDR-IQ, RPSpace SDR-14, or SDR-RADIO.com networked receiver. Sigmira offers wideband spectrographic, waterfall, and phase plane displays. It also demodulates various military, utility, and 'ham' radio signals.
Sigmira's features include:
'Waterfall' and spectrograph displays of up to 200 kHz width with the SDR-IQ/SDR-14.
Demodulation of HFDL, PSK31, FSK, SITOR-B, CW, and NFM modes.
Demodulation of NATO STANAG 4285.
Demodulation of the 'Japanese Navy Slot Machine'
Point and click signal selection/tuning.
Signal Database with automated tuning and logging.
Phase plane display.
Playback of saved .wav files.
16 bit sampling. Typical sampling rate: 48 ksps.
Signal strength meter.
Adjustable squelch.
Clock display with UTC and local time.
DSCdecoderDSCdecoder allows you to use your PC and soundcard to decode maritime mobile service messages using the Digital Selective Calling (DSC) system and also DGPS and Navtex broadcasts. DSC signalling is used in the MF, HF and VHF bands for distress and calling between ships and coast stations. Navtex messages are broadcast by coast stations and carry infomration about navigational warnings and weather forecasts. Messages that can be decoded include routine calls for test purposes between ships and coast stations; calls to establish communication by some other means (voice, etc.) between a ship and a coast station; notification of routine and safety messages from coast stations; Vessel Traffic Service (VTS) messages, distress messages and distress relay messages. DSCdecoder will decode these messages and display and log their content.
Frisnit Navtex DecoderNAVTEX decoder is an imaginitively named NAVTEX software decoder for NAVTEX transmissions. All you need is a shortwave radio and a computer to begin decoding signals yourself. I currently have the program running continuously and uploading NAVTEX messages to an online database. The data is also available via WAP at wap.frisnit.com so you can view the messages from your boat on your mobile.
From version 2.1.0 you can set up your own local NAVTEX service. This version will automatically upload your messages for viewing online. Apply here for an account on the online database and set up your own NAVTEX receiving station today!
JVComm32The multi-purpose FAX, RTTY / SYNOP / NAVTEX and SSTV program for Windows 95, 98, 2000, NT 4.0, XP, Vista and Windows 7 (Seems to run on Windows 10, but vendor has not tested.)
Mscan MeteoMscan Meteo is a powerful but easy-to-use program for receiving weather facsimile images with your PC and HF radio. Just connect your radio to your computer's sound card or to a SCS PTC II modem. Load the Mscan Meteo software, and you're ready to receive weather fax images, NAVTEX, RTTY, and GRIB files. No dedicated serial port connection is required.
NAVTEXviewThis is a wonderful little freeware utility program, developed and kindly supplied to us by Tobias Taufer (T2) from Germany, and designed to utilise the data in the Navtex Schedules database. This program allows the user to create a window on their desktop which will show stations which are active 'real time', and also those that are coming up next. I love this program and run it all the time now whenever I have NAVTEX decoder open. I would definitely recommend it to all Navtex fans! My thanks to Tobias for creating, developing and sharing this impressive program with us.
SeaTTYA program to receive weather reports, navigational warnings and weather charts transmitted in RTTY, NAVTEX and HF-FAX (WEFAX) modes on longwave and shortwave bands. It can decode GMDSS DSC (HF and VHF) messages. Software also can automatically save NOAA Weather Radio SAME voice messages (NWR SAME) and them digital headers. No additional hardware is required - you need only a receiver and computer with a sound card.
Platform: Windows 9x/NT/2000/XP/Vista (Seems to run on Windows 10, but vendor has not tested.)
YaDD GMDSS DSCThis excellent new program, also created by Dirk Claessens, now gives DSC enthusiasts a new alternative to existing DSC Decoding software, and with a user friendly interface. ** highly recommended **
YaND NavtexThis superb program, created by Dirk Claessens, a very experienced NAVTEX enthusiast from Belgium, offers a large number of unique features, and is a welcome addition for fans of this mode, and what a great name!:-) ** highly recommended **
Beacon-Time WizardBeacon-Time Wizard - or 'BTW' - provides a unique collection of informational views and tools - for ham radio operators and SWL listeners - to boost your HF radio pleasure and augment the effectiveness of the NCDXF/IARU International Beacon Network.
FarosAutomatic NCDXF beacon monitor for Radio Amateurs,
SWL'ers and HF communication engineers.
NDBfinderNDBfinder allows you to use your PC and soundcard to receive, detect, identify and log NDBs (Non Directional Beacons used for maritime and aeronautical navigation), that would otherwise be too distant or faint to detect. NDBfinder exploits the fact that almost all navigation beacons send their idents are precisely regular intervals. Using a unique combination of two Fourier Transforms and a Boxcar Integrator, NDBfinder is able to superimpose many successive indents and in doing so it can retrieve signals that are buried in the noise. This makes it possible for NDB DXers to detect beacons far beyond the normal reception range.
Ao40RcvAo40Rcv is a Windows program that can be used to monitor radio satellite telemetry signals using a soundcard as the source.
WXtoImgWXtoImg is a fully automated APT and WEFAX weather satellite (wxsat) decoder. The software supports recording, decoding, editing, and viewing on all versions of Windows, Linux, and Mac OS X. WXtoImg supports real-time decoding, map overlays, advanced colour enhancements, 3-D images, animations, multi-pass images, projection transformation (e.g. Mercator), text overlays, automated web page creation, temperature display, GPS interfacing, wide-area composite image creation and computer control for many weather satellite receivers, communications receivers, and scanners.
GRITTYGRITTY is an RTTY decoding program based on the technology developed for the RTTY Skimmer Server project. This is not a skimmer, it decodes a single signal in the 3-kHz audio coming from the transceiver via a soundcard, just like any other RTTY program.
MMTTY By JE3HHT - Makoto MoriRTTY with Windows and Soundcard
WinXP - Vista - Win7 (Seems to run on Windows 10, but vendor has not tested.)
Winlink/RMS ExpressWinlink Express is the preferred Winlink 2000 (WL2K) radio email client. It is in active development by the Winlink Development Team and is well-supported. RMS Express is designed to be most easily used by single users with a single call sign but it may be used to access one or two preset tactical addresses or alternate callsigns. RMS Express supports a wide selection of TNCs and multimode controllers, the new sound card mode WINMOR, as well as support for HF Pactor, SCS Robust Packet, VHF/UHF packet and direct telnet to WL2K CMS servers (for amateur radio High Speed Multimedia [HSMM], D-Star DD mode, or internet).

TitleDescription
AALogA comprehensive logger program designed for amateur radio station operators. It has a convenient interface, a good set of tools, and is fast and very easy to use. It looks like your paper logbook and uses all power of your computer. It can be integrated with the CW terminal program CwType, morse decoder CwGet and RTTY/PSK31 software TrueTTY. Also you can use AAVoice for voice operations. AALog is LoTW and eQSL.cc compatible. Platform: Windows 2000/XP/Vista. (Seems to run on Windows 10, but vendor has not tested.)
AAVoiceA digital voice processor for amateur radio operators. It uses prepared wav-files for transmission. If necessary you can use simple circuit for PTT-control. It has a lot macros for transmitting. It can interface with AALog logger and can be used via 'COM-interface' to work with other compatible programs.
Platform: Windows 9x/NT/2000/XP (Seems to run on Windows 10, but vendor has not tested.)
CommCat 4CommCat 4 is a radio control and logging program for radio amateurs who share a passion for talking to other hams around the world. CommCat works with most popular radios and accessories. It requires a Windows XP or later computer. CommCat 4 is compatible with the Vista and Windows 7 operating systems. (Seems to run on Windows 10, but vendor has not tested.)
CommCat is packed with features to help you find and work DX. Its acclaimed rule-based spot manager filters incoming spots from the Internet and alerts you when a needed DX station is present. The DX Tracker and Band Spotter windows help you analyze activity and operating habits.
DX Atlas 2.25Electronic World atlas for Radio Amateurs. Scrollable World map with smooth zoom, DXCC territories, province/state prefixes, Grid Squares, CQ and ITU Zones in the rectangular, azimuthal and Globe projections, 3D relief, Gray Line, city and island index, unique hierarchical prefix database, local time with DST for all cities, islands and call areas, unique ionospheric maps.
Integrates with HamCAP, IonoProbe, Band Master, and many 3-rd party programs.
DX4WINWelcome to the DX4WIN home page. DX4WIN is an easy to use, yet powerful logging program for every ham. It has been designed for the serious and the casual DXer. It has a number of features that make operating in a contest fun from the DXers perspective, and if you use a contesting program, DX4WIN can import your log after the contest.
DXLabDXLab is a freeware suite of eight interoperating applications that can be installed independently in any order. When multiple applications are running, they sense each other's presence and automatically interoperate to support your Amateur Radio DXing activities.
EchoLinkThe program allows worldwide connections to be made between stations, or from computer to station, greatly enhancing Amateur Radio's communications capabilities. There are more than 200,000 validated users worldwide - in 151 of the world's 193 nations - with about 6,000 online at any given time.
EchoStationEchoStation is perfect for portable and emergency use, or for clubs wishing to use a PC instead of specialized hardware to control a repeater. It also makes an excellent 'store and forward' simplex repeater when connected to a single transceiver.
The software even lets you set up an 'announcement machine' which plays scheduled voice announcements over your club's existing repeater, using a radio at another location, such as a home station.
FT-817 CommanderThe forerunner to Ham Radio Deluxe by Simon Brown.
Ham Radio DeluxeHam Radio Deluxe (HRD) is a suite of Windows programs providing CAT control for commonly used transceivers and receivers. HRD also includes mapping and PSK31 software.
Hamport v1.0 betaHamport is a small program for RIG control. It can read and set mode and frequency on your transceiver. This is beta version. The program can only control ICOM, Yaesu and Kenwood transceivers at present.
KCommKComm is meant to be an easy to use low resource usage log keeping program for the average K2 or K3 operator who may be a casual DXer or contest participant. Rather than try to do everything itself, KComm interfaces with some of the best available software for data mode operation and morse decoding so that you can use one logging program for all modes.
Logger32Welcome to Logger32, a 32-bit Amateur Radio logging program written by Bob Furzer, K4CY. Bob is also the author of Zakanaka, and a 16-bit version of Logger.
Logger32 has been developed to be a highly user configurable general purpose Amateur Radio logbook with computer control support for many radios and antenna rotators. It is NOT a contesting log, although there is no real reason why it could not be used for such, and does not contain some features that might be found in software specifically designed for this activity.
N1MM LoggerN1MM Logger is the world's most popular contest logging program. For CW, phone and digital modes, its combination of contest-optimized features is unmatched.
The program can be used with Windows XPsp3/Vista/Seven/Eight/Ten.
Omni-RigA COM component for transceiver/receiver CAT control
RoverLogRoverLog is a contest logging program for VHF, UHF, and microwave contests that use Maidenhead grid squares as their exchange. The original specification for this program was written by Sigurd Kimpel, KJ1K. The actual program was written by Tom Mayo, N1MU. The program is distributed under the Gnu Public License, which basically means the source code must always be kept free.
TR LOGTR LOG is a high-performance Amateur Radio contest logging program designed to make the most of your computer during a contest. It is designed so that the process of making and logging contacts is as efficient as possible - so you make more contacts.
UDY-2 Voice KeyerThe UDY-2 Voice Keyer digital voice keyer amateur radio software utility integrates many popular voice keyer features in one convenient easy to use program. Whether you're working a contest as multi op, single op, running a net, or just plain rag chewing the UDY-2 Voice Keyer has something to make hamming more fun and convenient for you.
Digital Voice KeyerVersion 1.23, WindowsXP, Vista, and Windows 7 Compatible (Seems to run on Windows 10, but vendor has not tested.)
Winlog32Winlog32 is Amateur Radio Logging software designed and working on all Microsoft Windows platforms, e.g. 95/98/ME/NT4/2000/XP/Vista/W7. (Seems to run on Windows 10, but vendor has not tested.) This software has been in development for many years and is ongoing, The Author (G0CUZ) provides this software FREE to use by all Radio Amateurs and SWL's in true 'Ham Spirit', as such no warranty is implied or given as to it's suitability or reliability.
Although Winlog32 is general purpose logging software, it has a definite slant on DX'ing on both HF and VHF with comprehensive tracking of various awards programs like DXCC, IOTA, WAZ etc. and includes all the features you would expect from good quality logging and DXing software and more...
WriteLogWriteLog for Windows combines the convenience and ease of use of Windows with the performance and features required by the top contest operators. No other package matches WriteLog's support for CW, Phone and RTTY contesting.
Whether you are a casual contester who only makes a handful of QSOs, or one of the big gun multi-ops that demands full networking and spotting support, WriteLog has the score improving features you need.
XMLogXMLog is an amateur radio logbook system for Windows 95, 98, ME, NT, 2000, XP, Vista, and Windows 7. (Seems to run on Windows 10, but vendor has not tested.)
There is no charge for using XMLog. Permission to distribute XMLog for profit is prohibited.