Silicon Labs Software USB Devices Driver

Cable Drivers

MD-CC3/4 and Windows x64 systems

Download Silicon Labs CP2104 USB to UART Bridge VCP Driver 6.6.1 (Other Drivers & Tools). Even though the USB UART is not yet supported, the USB Audio CODEC is available in Big Sur. Make sure port is set for RS232C not Tuner. Silicon Labs has released a new driver. v6.0.0 released December 23, 2020. YMMV: Installs but doesn't load on Apple M1 Silicon macOS 11.1.

  • The Silicon Labs Z-Wave Serial API specification is available to all owners of a Silicon Labs Z-Wave SDK. The device implements a virtual serial interface used by the Z-Wave application. Linux and Mac OSX has a built in device driver for the stick and will create a new device named like /dev/ttyACM0 (Linux) or /dev/cu.usbmodemfa131 (OSX).
  • Free silicon labs cp210x drivers download software at UpdateStar - The CP210x is a single-chip USB to UART bridge that converts data traffic between USB and UART formats. The chip includes a complete USB 2.0 full-speed function controller, bridge control logic and a UART interface with transmit/receive.

The older versions of the MD-CC30x-001 USB to SPI and MD-CC40x-001 USB to RS-422/485 communication converter cables were developed to work with Windows 32-bit operating systems. These cables must have the the internal ID reset in order to be supported by current Windows 64-bit operating systems.

How do I know if I have an older cable?

The most recent cable will install as 'Silicon Labs C210x USB to UART Bridge (COMXX)' in the device manager of your PC under Ports (COM and LPT).

In the case of MD-CC3 and MD-CC4 cables with the incompatible ID, when the device manager attempts to find the drivers and fails to install them, the message that opens will show the IMS part number: MD-CC400-000 or MD-CC300-000 on the dialog, as shown below.

Additionally, the part number will display under other devices in your computer's device manager.

Please contact applications for information on cable updates

MD-CC404-000 & MD-CC405-000
The MD-CC404/5-000 drivers are applicable to Lexium MDrive RS-422/485 products. This device is 'plug-n-play' and the drivers should automatically install to an Internet connected PC. Should your network block automated driver installs or the PC not be connected, the drivers may be downloaded from:

MD-CC404-000 Drivers (FTDI VCP Drivers)
Note: This link will open in a new browser tab/window.

MD-CC40x-001
The MD-CC40x-001 drivers are applicable to MDrivePlus and MForce Motion Control RS-422/485 products. This device is 'plug-n-play' and the drivers should automatically install to an Internet connected PC. Should your network block automated driver installs or the PC not be connected, the drivers may be downloaded from:

MD-CC40x-000 Drivers (Silicon Labs CP210x USB to UART Bridge VCP)
Note: This link will open in a new browser tab/window.

Legacy MD-CC40x-001 drivers

Use ONLY with CC4 cables with the IMS ID on 32 bit Windows systems

Driver PackageInstallation Instructions

MD-CC30x-001
The MD-CC30x-001 drivers are applicable to MDrivePlus and MForce Step/direction and Speed Control SPI products. This device is 'plug-n-play' and the drivers should automatically install to an Internet connected PC. Should your network block automated driver installs or the PC not be connected, the drivers may be downloaded from:

MD-CC30x-001 Drivers (Silicon Labs CP210x USB to UART Bridge VCP)
Note: This link will open in a new browser tab/window.

Legacy MD-CC30x-001 drivers

Use ONLY with CC3 cables with the IMS ID on 32 bit Windows systems

Driver PackageInstallation Instructions

Silicon Labs Software USB Devices DriverDriver

Nisca printers driver download for windows. MD-CC50x-000

These drivers apply to the MD-CC500-000 (MDrivePlus and MForce products) and MD-CC501-000 (Lexium MDrive products) USB to CANopen Communications converters

MD-CC50x-000 Drivers (PEAK Systems PCAN-USB)
Note: This link will open in a new browser tab/window.

Silicon Labs Software – Shareware –

Overview

Windows Driver Package - Silicon Labs Software (DSI_SiUSBXp_3_1) USB (02/06/2007 is a Shareware software in the category Miscellaneous developed by Silicon Labs Software.

It was checked for updates 2,042 times by the users of our client application UpdateStar during the last month.

The latest version of Windows Driver Package - Silicon Labs Software (DSI_SiUSBXp_3_1) USB (02/06/2007 is 2.6.2007.3.1, released on 03/18/2014. It was initially added to our database on 03/28/2013. The most prevalent version is 2.6.2007.3.1, which is used by 100 % of all installations.

Best Usb Devices

Windows Driver Package - Silicon Labs Software (DSI_SiUSBXp_3_1) USB (02/06/2007 runs on the following operating systems: Windows.

Windows Driver Package - Silicon Labs Software (DSI_SiUSBXp_3_1) USB (02/06/2007 has not been rated by our users yet.

Examples Of Usb Devices

Write a review for Windows Driver Package - Silicon Labs Software (DSI_SiUSBXp_3_1) USB (02/06/2007!

2,042 users of UpdateStar had Windows Driver Package - Silicon Labs Software (DSI_SiUSBXp_3_1) USB (02/06/2007 installed last month.
02/11/2021 ClickCharts 5.79
02/12/2021 Microsoft Edge WebView2 Runtime 88.0.705.63
02/12/2021 Fairlight Studio Utility 1.2
02/12/2021 Webcam Simulator XP Edition 7.929
02/12/2021 Easy CHM 4.0

Silicon Labs Software Usb Devices Driver Free

02/10/2021 Adobe updates available
02/10/2021 Firefox 85.0.2 update fixes startup problem
02/09/2021 Microsoft Patchday February 2021
02/09/2021 Updates for Chromium-based browsers now available
02/08/2021 Find the best browser extensions to protect your privacy

Silicon Labs Software Usb Devices Driver Windows 7

  • » silicon labs software dsi_siu
  • » windows driver package-silicon labs
  • » silicon labs driver
  • » dsi siusbxp
  • » silicon labs 2.6.2007 31
  • » silicon labs softwar dsi si
  • » windows driver package
  • » windows driver package silicon labs
  • » silicon labs software version 3.1
  • » dsi_siusbxp_3_1 usb