Triorail Port Devices Driver Download

PC Pitstop - PC Performance Roots. PC Pitstop began in 1999 with an emphasis on computer diagnostics and maintenance. During the early days of the dot com boom, our online PC maintenance tools were skyrocketing. Garmin Support Center is where you will find answers to frequently asked questions and resources to help with all of your Garmin products.

The CH340 chip is used by a number of Arduino compatible boards to provide USB connectivity, you may need to install a driver, don’t panic, it’s easier than falling off a log, and much less painful.


Windows

(Manufacturer’s Chinese Info Link)

  1. Download the Windows CH340 Driver
  2. Unzip the file
  3. Run the installer which you unzipped
  4. In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system.

Older Windows Driver Version and Instructions

  1. Download the Windows CH340 Driver
  2. Unzip the folder.
  3. If you are running a 64Bit Windows: – run the SETUP_64.EXE installer.
  4. If you are running a 32Bit Windows: – run the SETUP_32.EXE installer.
  5. If you don’t know, try the 64 bit and if it doesn’t work, the 32 bit.
  6. In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system.

Macintosh

(Manufacturer’s Chinese Info Link)

The following github has up to day pkg files for 1.3, 1.4 and 1.5 at time of writing, thanks to Joshua Wallis for bringing this to my attention…

Direct Download Links (from the github repo above):

See the github link above for installation instructions if you need them. Jvc usb devices driver download for windows 10.

Previous macinstosh downloads if the above doesn’t work for you…

(V1.3) Download the CH340 Macintosh Signed Driver for Mavericks (10.9), Yosemite (10.10) and El Capitan (10.11) and Sierra (10.12)

Inside the zip file you will find a PDF and a “pkg” file, short version, double click the pkg file, the PDF has some extra information.

OSX Sierra (10.12) Note

Devices

A kindly user, Maarten Segers reports

FYI, the driver documented here WILL crash on OSX Sierra.

Make sure to use this one instead: https://github.com/MPParsley/ch340g-ch34g-ch34x-mac-os-x-driver

I can personally not test on MacOS and can not vouch for the above drivers at github, but there you go.

See uninstalling information at the bottom of the page if the driver causes problems for you.

Here is an older version of the Mac driver, NOT FOR 10.12 Sierra

(V1.0) Download the CH340 Macintosh Signed Driver for Mavericks (10.9), Yosemite (10.10) and El Capitan (10.11)

Linux

(Manufacturer’s Chinese Info Link)

Drivers are almost certainly built into your Linux kernel already and it will probably just work as soon as you plug it in. If not you can download the Linux CH340 Driver (but I’d recommend just upgrading your Linux install so that you get the “built in” one).

Uninstalling From Macinstosh

A couple of Mac users have said “the driver crashes my mac Sierra how do I uninstall”.

Firstly regards the crash make sure you installed the 1.3 version of the driver, not the old one. You could download it directly from the Manufacturers Website in case they have issued an update since I wrote this page.

Secondly a quick google search reveals that this is how you uninstall:

Triorail Port Devices Driver Download Windows 10

  1. Open a terminal and type: cd /Library/Extensions/
  2. Verify that the .kext file is present: ls grep usbserial.kext
  3. Output should be: usbserial.kext
  4. Then type: sudo rm -R usbserial.kext
  5. Verify that the .kext file has been removed: ls grep usbserial.kext
  6. Output should be empty.
  7. After you should remove the files stored in receipts folder: cd /private/var/db/receipts/
  8. Find the enties: ls grep usbserial*
  9. Output should be: codebender.cc.ch34xinstaller.usbserial.pkg.bom codebender.cc.ch34xinstaller.usbserial.pkg.plist
  10. Remove each one of the files of the above list: sudo rm -r filename`

Dec 21, 2020 • Filed to: USB Recovery • Proven solutions

Have you ever had difficulty connecting your devices to your computer using a Prolific USB to Serial adapter? If yes you are lucky to find this page, it will give you all the information need to fix an unresponsive Serial driver adapter. You may have noticed a yellow exclamation mark hovering over or beside the USB to Serial Driver when searching your Device Manager and if you have we can all agree that it signifies a prevailing problem.

Overview of the Error

If you are not able to connect your device to your PC using a USB to Serial adapter it may be that

Triorail Port Devices Driver Download Windows 7

  • The USB driver is outdated
  • The USB Driver is missing
  • Or even a corrupted driver

While you can't be so sure what the exact problem is there are solutions you can adopt to fix the issue once and for all. Read on to find quick fixes to resolve the problem.

1# Fix Prolific USB to Serial Driver not Working

Solution: Roll your Prolific USB to Serial Driver back to an older version

Updating your drivers often work wonders for your system because it makes sure that it runs on the latest features that guarantee maximum functionality. Unfortunately updating your drivers can cause this kind of error especially if your latest update does not work too well with your hardware. Once you upgrade your PC to the latest Windows version your Prolific USB to Serial Driver also updates to the latest driver software and if the driver is not compatible with your Hardware issues may arise. To correct the error, you will have to download the driver again by following these steps.

  • Right-click on your PC Start button and open Device Manager
  • Double click LPT and COM ports then locate the Prolific USB to Serial Driver and right-click it so you can select Update Driver
  • For driver software click My computer
  • From My computer select 'Let me pick from a list of drivers available'
  • Choose an older version from the list then click Next
  • The driver you selected will be installed automatically
  • Once it has been downloaded reconnect the driver to see if it works.

2# Fix Prolific USB to Serial Driver 'Coder 10'

Triorail Port Devices Driver Download Free

Driver issues reveal themselves in so many ways or through messages such as

  • This device will not start (Code 10)
  • There is no driver installed in this device
  • The driver was not successfully installed

A code 10 error may arise because the chip you are using is not an original one. If you are using a fake, the manufacturer has a way of disabling it due to copy write infringement and the copy write takes effect once you download a recent update. To protect your PC from getting this code, you will have to make sure that your Windows 10 never updates a driver without approval. Updates come in the form of 64 bit and 32-bit drivers. Below we will show you how to work your way around the problem.

Window 64 bit Fix

To fix Windows 64 bit OS including Prolific USB to Serial Adapter, follow through these steps.

  • Download 'PL2303_64bit_Installer.exe and Save
  • Remove every USB to Serial adapter from your PC and double click the 'PL2303_64bit_installer.exe
  • Follow the prompt by plugging in one USB to Serial adapter the click on Continue
  • Reboot your PC to get Windows up and running

If you have followed these process through and you still see the same error go to your device manager

Triorail Port Devices Driver Download Pc

  • Open the control panel and navigate to Device Manager
  • From your control panel navigate to the System category and click the Hardware tab
  • Scroll to the LPT/COM port and double click Prolific USB to Serial Comm Port
  • Click Drivers in the Properties section
  • The Driver you choose should read '3.3.2.102 with an appropriate date attached
  • If the date is wrong then it means the wrong driver was installed
  • Unplug the Serial adapter and run the steps again to install the correct driver

Window 32-bit

For Windows 32-bit OS systems follow these steps

  • You will have to download the 'PL-2303_Driver_Installer.exe and save from Microsoft download link
  • Run the program and eradicate the driver if you can
  • Run the installer once more to install a correct driver

To Troubleshoot for error if your device still does not work

  • Go to Control panel, enter System to access your Device Manager
  • Scroll down to the LPT/ COM port then double click Prolific USB to Serial Comm Port
  • Click Driver in the Windows Properties section
  • The driver must be numbered as '2.0.2.8' and dates accordingly
Triorail port devices driver download pc

If the driver was not installed, remove the Serial adapter then run 'PL2303_Driver_Installer.exe' again. Follow directions in Device Manager to download the correct driver

The three solutions listed in this article have proven to be quite helpful in fixing a Prolific USB to Serial driver not working on Windows 10. They may appear confusing at first but if you follow each step in detail you can resolve the issue.

Video Tutorial on How to Fix USB Device Not Recognized

Triorail Port Devices Driver Download

USB Solution

Recover USB Drive
Format USB Drive
Fix/Repair USB Drive
Know USB Drive